BRICK WASH

This is a detergent acid blend designed for removing excess cement during building operations.  This light green liquid can be diluted with water and can be used to remove light lime discoloration from salts, stone, bricks, etc.  It can also be used as an etching acidic product and must be handled with care.

This industrial cleaning chemical cleans very effectively and does not leave a smell behind after cleaning. It is highly acidic. It is non-flammable and mixes easily with water.

Safety eyewear, gloves and suitable overalls should be worn when handling this product. Open the container partially and stand well back. Allow any excess gases to escape. Open carefully and pour a small amount of this industrial cleaning chemical mixed with the same amount of water on the area to be cleaned. Use a stiff brush or broom to agitate the area. When you have the desired result, rinse well with water. If the results are not satisfactory, try using the product as is, without mixing in water. For light stains or lime deposits you can mix one part of this cleaning chemical to ten parts water.

Use this product with great care. Always wear safety eyewear, gloves and appropriate overalls. Brickwash contains acids so it is corrosive to human tissue and fabrics. Should skin contact occur, remove contaminated clothing and rinse affected area in clean, flowing water for at least ten minutes. If irritation persists seek medical advice. If eye contact occurs, wash eyes in clean, flowing water and seek medical attention. If ingested, seek medical advice immediately. Keep out of reach and children. Keep out of pathways to avoid accidental spillage.

Click here to request a MSDS